Hardware Set-up and Activation Instructions

PaySimple Setup hours at SalonBiz are: Monday-Friday 7:00am to 7:00pm CST, Saturday 7:00am to 9:00pm CST, and Sunday 10:00am to 6:00pm CST.

Let’s Get Started!

  1. Unpack

  2. Connect the device per instructions – See below

  3. Call SalonBiz at 888.809.2802 option 5 to activate your account and finalize set up

Verifone MX915

First, you need to assemble the terminal. In the box you will find the terminal, the communications module, the power cable, ethernet cable and installation guide.

The device requires power and an ethernet connection, so make sure you have both in close proximity to where you want to set up the device.

The communications module will need to be inserted into the back of the terminal. Turn the terminal over and line up the communications module so that the tabs face upwards. Then simply slide the module into place until the two tabs click into place.

Next you need to connect the power adapter into the port on the top of the terminal. And plug the ethernet cable into the top of the terminal into the ethernet port closest to the power port.

And then plug the power and ethernet cables into a power outlet and ethernet port.

Once the terminal has power it will begin it’s boot up sequence. It takes up to four minutes to run through this boot-up sequence, so be patient. Once the device completes its bootup sequence it will then advance to a screen displaying the activation code.

You will use this code to pair your terminal with SalonBiz.

Record that activation code and call SalonBiz Hardware Activation Team at 888.809.2802 option 5.

You will not be able accept payments until SalonBiz has linked the device to your merchant account.

Ingenico iSMP4

First you need to unpack the box. Inside the box you will find the terminal and a power cord. There may be a USB-c cable as well. That comes standard from the manufacturer, but you will not need it.

The iSMP4 should arrive charged. Turn on the unit using the power switch on upper right side of the terminal. Hold until it beeps and smiles at you. If it does not turn on or the battery is low, plug it in to a power source until fully charged and continue the set-up sequence.  DO NOT remove the battery.

After the terminal runs though its powerup sequence, you’ll need to connect the terminal to your WiFi network. When you see “This Lane Closed” you need to open the communication settings, by pressing the F key five (5) times rapidly.

Then select Access Points. You’ll find (Access Points) on the digital display above the F4 key. Then select New (under F1 key). The device will scan for available networks. Select the network you want to connect to and press the GREEN enter key (bottom right).

Confirm the desired security setting (WPA/WPA2) and enter the WiFi password using multi-tab text entry. For example, pressing 5 multiple times will cycle through numeral 5 and the letters JKL on the keyboard. Punctuation marks are entered by tapping the # key. Once the password is entered press the green enter key. The terminal will then advance to a screen displaying the activation code.  You will use this code to pair your terminal with SalonBiz.

Record that activation code and call SalonBiz Hardware Activation Team at 888.809.2802 option 5.

You will not be able accept payments until SalonBiz has linked the device to your merchant account.

Ingenico iPP320

First you need to unpack the box. In the box you will find a two-in-one cable that will supply the device with both USB network access and power. The power adapter into this two-in-one access point, then you will want to plug the network cable into an ethernet port on your router and the power adapter into a wall socket. Then plug the two-in-one cable into the back of the iPP320 terminal. You can pull the pull tabs and screw the adapter into the terminal for greater stability.

There is no power switch. When the device is plugged in, it will power up automatically. Once powered on, the terminal will run through its bootup sequence and will display an activation code. You will use this code to pair your terminal with SalonBiz.

Record that activation code and call SalonBiz Hardware Activation Team at 888.809.2802 option 5.

You will not be able to accept payments until SalonBiz has linked the device to your merchant account.